Power supply

Standard Line voltage does not usually provide enough frequency or voltage to adequately light the Lumaglass™ EL lamp. Therefore, a Lumaglass™ power supply is needed to convert standard line voltage to a higher voltage and frequency. The power supply plugs into a standard wall outlet, and is then connected to the lamp.

Click here to see the Basic Wiring scenario.

Some basic facts about the Lumaglass™ inverter are:

• Accept Input (Mains) voltage of anywhere from 100 to 250 Volts AC, at either 50 or 60 Hz.
• Produce Output voltage (adjustable) of anywhere from 50 to 330 Volts AC, at 650 Hz.
• Have Fused input voltage protection.
• Electronic Open Circuit and Short Circuit and Ground Fault Interruption Protection.

Lumaglass™ Compensating Power Supplies come in 3 models. Each model can power a different range of lamp sizes.